|
The
new generation of professional motor with DiSEqC 1.2 compatible positioner is a
powerful motor designed for rotating a satellite dish. Your satellite receiver
has full automatic control using the DiSEqC 1.2, DiSEqC 1.3 and "Go To X"
commands to operate this motor. Once the satellite positions have been
programmed in the system, the motor returns the dish to exactly the correct
location when you switch channels.
-
Suitable for antennas up to 1.4 m (aluminum)
-
"GO TONS of X" Function for engine setting
without programming
-
Controlled via single coax cable
-
Silent operation
-
Motor rotation range 95°
-
Functional in all climate zones
-
Simple assembly and installation
-
Developed and produced in Europe
|
Technical data: |
|
Operating protocol |
DiSEqC TM 1.2 level + Go To X function |
|
Horizontal turning |
95° tip. (99° max.) |
|
Inclination (elevation) |
75° max. |
|
Maximum dish diameter |
140 cm Alu. |
|
Programmable positions |
30 satellites |
|
Preset positions |
without satellites |
|
Maximum dish weight |
12 kg for normal operation |
|
Motor pole length (strait part) |
120 mm |
|
Bent pole diameter |
Ø 40 mm |
|
Rotation Speed (no load |
2,5°/s (H-18V) 2°/s (V-14V) ±25% |
|
Rotation Speed (by load 85 cm dish) |
2,3°/s (H-18V) 1,7°/s (V-14V) ±25% |
|
Operating power supply |
14/18V DC |
|
Stand-by consumption |
15 mA ±25% |
|
Operating consumption by 85cm dish |
95-150 mA ±25% |
|
Starting (max.) consumption |
350 mA (80mS) |
|
Operating temperature |
-35°C +70°C |
|
Min. and max. relative humidity |
35% to 100% |
|
Connectors |
F type 7 mm |
|
Connections |
sat coaxial cable 75. impedance |
|
Connection cable up to 30m |
inner conductor CU O 1,02mm R=22./km |
|
Connection cable up to 100m |
inner conductor CU O 1,13mm R=18./km |
|
EAST-WEST limits |
hardware fixed, software not
programmable |
|
Fine tuning Stepp |
0,36° min. |
|
Weight with box |
2,68 kg |
|
Maximum permissible wind speed @ 85
cm/140 cm dish |
140 km/h / 80 km/h |
|
Maximum permissible torque at rotation |
15 Nm |
|
Maximum static torque on idle |
150 Nm |
|
Control buttons on motor |
2 for turning motor E/W |
|
Dimension of packed into box |
268 (L) x 132 (W) x 155 (H) mm |
|
Lifetime min. |
50.000 cycles per 180° (90°E + 90°W) |
|
